EDER ALGEMA-FITZEL BLITZLADER 2 Operating Instructions Manual page 45

Eder GmbH
Side lights for the working area
Touch panel in the driver's cab:
1. Button rotating orange lights
2. Push button working light
3. Front flashers button
4. Rear lashers button
•
The rotating flashers, the work lights and the flashers lighting at the front and rear
must be switched on separately on the touch panel. The ignition of the base vehicle
must be on for this. If one of the lights mentioned is active, the corresponding button
in the touch panel is also backlit.
•
The lighting equipment described in this chapter can be operated independently of the
parking brake. However, they go out approx. 10 minutes after the ignition of the base
vehicle has been switched off.
•
The rotating beacons can also be operated while driving.
•
From a speed of approx. 10 km/h, the working lights and the surrounding lights at
the front switch off automatically and also remain off when the speed drops below
this level.
Operating Instructions Algema Blitzlader 2 Air - Edition
back lights for a better view while driving backwards
4 Operation and use
45/ 100