Eder GmbH
Work with the winch*!
Defective hydraulic parts!
Cargo drags across the plateau!
Operating Instructions Algema Blitzlader 2 Air - Edition
Danger of crushing on the rotating drum of the cable winch or on
the cable hook.
The rope can break.
Persons can be injured by the tensioning cable when pulling the
cable winch.
People can trip over the tight rope.
° Do not use damaged ropes.
° Do not reach into the drum of the winch when the freewheel is
deactivated.
° No persons may be behind the vehicle to be loaded or unloaded
as long as the vehicle is held by the rope.
°No persons are allowed on the plateau, in the area of the drive-up
ramps and generally between the winch and the vehicle to be
transported when a load is applied to the rope.
°Wear work gloves when working with the rope.
°When pulling, always make sure that the rope is wound neatly onto
the drum.
Risk of injury from a hydraulic fluid escaping at high pressure.
Hydraulically moving parts can yield unexpectedly in the event of
leakage.
°Never touch pipes and screw connections that are leaking.
In case of leakage, secure hydraulically moving parts against
unforeseen movement before reaching into the danger zone.
Have defective hydraulic parts replaced immediately by a
specialist workshop.
Damage to the car transporter.
Only load vehicles that can roll or use shunting rollers.
°Remove or secure hanging components before loading.
4 Operation and use
19/ 100
Need help?
Do you have a question about the ALGEMA-FITZEL BLITZLADER 2 and is the answer not in the manual?