Working Instruction, Mechanical
3.3 Standard Installation
3.3.1 Label Installation
Print a new label.
Position the right edge of the label against the edge of the
battery cavity. Line the top of the label up with the edge of
the liquid intrusion indicator hole.
N
: D
OTE
O NOT GET ANY LABEL ADHESIVE ON THE BATTERY
.
CONTACTS
Smooth the label out onto the battery cavity surface.
3.3.2 Battery Installation
Insert the contact end of the battery into the cavity as
shown.
1211-1553 1
39(76)
©
Sony Ericsson Mobile Communications AB