Alcatel-Lucent 9500 MPR User Manual page 96

The ODU synthesizer is hard-coded for 250 kHz steps. Therefore the
Tx frequency is a multiple of 250 kHz. For frequency channel plans
that do not fall on 250 kHz steps, the user will have to set the Tx fre-
quency to the nearest allowed value.
NE 9500MPR-A 1.0 NE 9500MPR-A 1.0
MSS-8
Slot#1 MSS/CORE-MAIN
Slot#2
Slot#3 MSS/DS3
Slot#4
Slot#5 Slot#5 MSS/DS1
Slot#6
Slot#7 MSS/RADIO Dir#3-Ch#1
Slot#8
Slot#9 MSS/FANS
ODU Dir#3-Ch#1
Select the TX RF Frequency within
the allowed range when ODU is not
connected to MSS.
RxFreq (KHz) displays the RX RF
Frequency. This is the result of the
calculation: RX Frequency - TX
Frequency - Shifter Frequency.
Shifter. Select TX (Go) and RX (Return)
separation frequency from the Shifter
Data Help list.
Range. Displays range of TX RF
frequencies that may be entered.
Tx Mode. Read Only Field. Status of
Local Tx Mute function.
Alarm Profile. Displays Profile
Name selected on Alarm Severity
Profile Screen.
Figure 4 - 19 MD300 Module Provisioning, Presetting Mode (Sheet 2 of 2)
4-44
Note
1
3
5
7
5
Remote Inventory
Include alarms from sub-nodes
Severity Event Time
252.0 MHz
6093000..6153000
6148000
6400000
7
2
4
6
8
Select a Shifter
Frequency from the
dropdown menu
under Channel#1.
4
Entity Probable Cause
TX RF Frequency is automatically
entered by ODU when ODU is
connected to MSS. If the ODU is
not connected to the MSS, enter
the TX RF frequency, within
allowed range.
Read Only Field.
Displays RX RF frequency.
Result of calculation:
RX Freq - X Freq = Shifter Freq.
ATPC. Check to enable ATPC.
ATPC Power Range.
Remote ATPC Rx Threshold.
Default value is -55 dBm.
Remote ATPC Rx Threshold.
Default value is -55 dBm.
COM
SUP
OS
NTP
9
AC
9500-1356A-B
08/07/08