Alcatel-Lucent 9500 MPR User Manual page 95

Microwave packet radio
Hide thumbs Also See for 9500 MPR:
Table of Contents

Advertisement

4.7.2.6
Provision MD300 Module
See
Figure 4 -
19. Follow the steps to provision the MD300 module for Presetting Mode.
See
Figure 4 - 20
and follow the steps to provision the MD300 module for Adaptive Modula-
tion mode.
CRI
MAJ
MIN
0
3
1
Protection Schemes
Equipment
NE 9500MPR-A 1.0
NE 9500MPR-A 1.0
MSS-8
Slot#1 MSS/CORE-MAIN
Slot#2
Slot#3 MSS/DS3
Slot#4
Slot#5
Slot#5 MSS/DS1
Slot#6
Slot#7 MSS/RADIO Dir#3-Ch#1
Slot#8
Slot#9 MSS/FANS
ODU Dir#3-Ch#1
3
Mode. Select Presetting
from dropdown list.
Reference. Displays
reference channel spacing
based on capacity and
modulation. Select from
dropdown list.
10 MHz
30 MHz
40 MHz
Capacity. Read Only Field.
This is the nominal bit rate for quantity
of DS1 lines being used. Capacity
Matrix Table will be displayed.
PPP RF. Check to enable PPP RF
port. When not checked (disabled)
user cannot change:
• Routing IP Protocol
• OSPF Area
• Remote Address
Alarm Profile. Read Only Field.
Displays Profile Name selected on
Alarm Severity Profile screen.
Figure 4 - 19 MD300 Module Provisioning, Presetting Mode (Sheet 1 of 2)
WNG
IND
0
0
Synchronizations
Connections
1
1
3
5
7
Include alarms from sub-nodes
Severity
10 MHz
32 QAM
Select the MSS/Radio (MD300)
Module slot in the Resource Tree
area. The selected name will be
highlighted in yellow. This selection
should also highlight the MSS/Radio
(MD300) Module in blue in the
Resource List Area.
Double left click the
module. The Settings
Tab (below) will open.
2
4
6
8
Remote Inventory
Event Time
Entity
Modulation. Displays
modulation scheme based
on reference channel
spacing and capacity.
Select from dropdown list.
Check to enable radio ID
mismatch function.
Enter number from 1 to 100
for receiver ID. Must match
transmitter ID at other end
of hop.
Enter number from 1 to 100
for transmitter ID. Must
match associated receivr ID
at other end of hop.
OSPF. Click to enable Open Shortest
Path First protocol then select area
name that has OSPF protocol. Select
from dropdown list.
EXT
0
7
2
9
Probable Cause
32 QAM
128 QAM
256 QAM
EQP
TRS
4
2
COM
SUP
OS
NTP
AC
9500-1356A-A
08/25/08
4-43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

9500 mpr-a

Table of Contents