Alcatel-Lucent 9500 MPR User Manual page 87

Signal Mode .
Configures line format. Allows user to choose
if line is dropped and inserted (by selecting
Unframed) or passed through or not used (by
selecting Disabled).
Service Profile. Provisioning Rules:
1. DS1 Port Service Profile provisioning must be the same at
both ends of the link.
2. DS1 ports can be provisioned independently.
3. Provisioning a DS1 port TDM2TDM prevents cross-
connecting that DS1 port to Ethernet access ports 1-4.
4. Flow ID number is unique for that DS1 port and once
assigned, cannot be repeated throughout the network.
Figure 4 - 15 P32E1DS1 Module Provisioning TDM2TDM (Sheet 2 of 2)
Unframed.
Select Unframed if port (DS1 line) is:
•
being used as a source or destination (typical choice for a
line being used at a terminal).
•
being dropped or inserted (typical choice for a line being
dropped and inserted at a drop and insert repeater).
Apply settings
for this port
number.
TDM2TDM
In TDM2TDM mode, the MPR operates like a TDM Radio.
DS1's are collected, packetized, transmitted over the radio,
switched in the node and then depacketized at the last node.
Grayed out for
TDM2TDM.
Grayed out for
TDM2TDM.
Apply settings
to all port
numbers.
9500-4011A
10/05/08
4-35