Alcatel-Lucent 9500 MPR User Manual page 27

Item Description
Optical Cable, LC to FC, 3 meter,
single mode
Optical Cable, LC to FC, 5 meter,
multi mode
Optical Cable, LC to FC, 10 meter,
multi mode
Waveguide Options
Standard
Provides transition from the filter SMA output to CMR-137
or WR-75. These kits provide a 15 inch SMA (M) to SMA
(M) flex cable and a SMA (F) to waveguide transition
(CMR or WR) for each antenna port required. The
waveguide transitions mount directly onto the rear of the
MPT.
Single Port WG Kit, CMR-137,
6 GHz (5850-7125 MHz)
Dual Port WG Kit, CMR-137,
6 GHz (5850-7125 MHz)
Option 1
These kits provide transition from the filter to the antenna
waveguide connector using flexible cable. The kits
include (1) 4 foot SMA (M) to Type N (M) 1/4" low loss
cable and (1) Type N (F) to CPR waveguide adapter.
WG Kit, 6 GHz
Option 2
Provides a SMA to Waveguide transition for a MPT termi-
nal, equipped with diplexer filters, installed in either posi-
tion A2, A5, or A8 to the top of the rack using rigid
waveguide. The kits include a SMA cable, SMA/
waveguide adapter, straight waveguide, brackets and
waveguide clamps. Refer to Network Engineers for spe-
cific part numbers.
6/8/11 GHz, HS, A2 Position
6/8/11 GHz, HSSD, A2 Position
6/8/11 GHz, HS, A5 Position
6/8/11 GHz, HSSD, A5 Position
6/8/11 GHz, HS, A8 Position
6/8/11 GHz, HSSD, A8 Position
Table 1 - 9 Parts List (Cont.)
Part Number
3EM07651AH
3EM07651AJ
3EM07651AK
3DH04122GA
3DH04122GB
695-7834-007
Refer to Network
Engineers
Refer to Network
Engineers
Refer to Network
Engineers
Refer to Network
Engineers
Refer to Network
Engineers
Refer to Network
Engineers
Remarks
1-15