Procedure:
1.
Drag mouse and draw line between PDH port and RADIO. PDH-RADIO
pop-up displays.
2.
On the PDH-RADIO pop-up, check box next to Flow ID number of all DS1/
DS3 lines to be cross connected.
3.
On the PDH-RADIO pop-up, click OK.
4.
On the Cross Connections screen, click Apply.
Note
Only DS1 pop-ups are shown.
Figure 4 - 29 PDH-to-Radio Crossconnect (Sheet 1 of 3)
9500-1131A
08/24/08
4-69