Alcatel-Lucent 9500 MPR User Manual page 86

4.7.2.2 Provision P32E1DS1 Module TDM2TDM
See Figure 4 - 15. Follow the steps to provision DS1 lines (ports) 1-32 configured for
TDM2TDM Service profile.
Protection Schemes
Equipment
Single left mouse click will highlight
the resource. This selection causes
the activation of the P32E1DS1
NE 9500MPR-A 1.0
module in the resource list area by
MSS-8
outlining the module in blue.
1
Slot#1 MSS/CORE-MAIN
Slot#2
Slot#3 MSS/RADIO Dir #3-Ch#1
Slot#4
Slot#5 MSS/DS1
Slot#6
Slot#7 MSS/DS3
Slot#8
Slot#9 MSS/FANS
ODU Dir#7-Ch#1
3
The purpose of TDM Clock Source provisioning is to select the mode that will be used to sync TDM DS1 data to the node Synchroniza-
tion source. The user can select one of three modes: Adaptive, Differential, and TDM_Line_In for all 32 lines. All lines must be the same.
Figure 4 - 15 P32E1DS1 Module Provisioning TDM2TDM (Sheet 1 of 2)
4-34
Synchronizations Connections
3
Double
left click
2
1
3
5
7
Alarms Settings Remote Inventory
Include alarms from sub-nodes
Severity Event Time
7
Displays Profile Name
selected on Alarm
Severity Profile screen.
Distance to cross connect.
Select line code to match DS1 input.
Note
2
4
6
8
Entity Probable Cause
8
Flow ID number
required to transport
DS1 data. Enter any
number from valid
ranges. Refer to
Table 4-1.
Flow ID number is line (port) unique and must not be
repeated in radio network. Loss of DS1 data can occur.
COM
SUP
OS
NTP
9
AC
See details
Sheet 2.
4
6
5
CAUTION
Possibility of
Service
Interruption
9500-4007A R11
01/29/09