Alcatel-Lucent 9500 MPR User Manual page 89

4.7.2.3 Provision P32E1DS1 Module TDM2ETH
See Figure 4 - 16. Follow the steps to provision DS1 lines (ports) 1-32 configured for
TDM2ETH service profile.
Protection Schemes
Equipment
Single left mouse click will highlight
the resource. This selection causes
the activation of the P32E1DS1
module in the resource list area by
NE 9500MPR-A 1.0
outlining the module in blue.
MSS-8
1
Slot#1 MSS/CORE-MAIN
Slot#2
Slot#3 MSS/RADIO Dir #3-Ch#1
Slot#4
Slot#5 MSS/DS1
Slot#6
Slot#7 MSS/DS3
Slot#8
Slot#9 MSS/FANS
ODU Dir#7-Ch#1
3
The purpose of TDM Clock Source provisioning is to select the mode that will be used to sync TDM DS1 data to the node Synchroniza-
tion source. The user can select one of three modes: Adaptive, Differential, and TDM_Line_In for all 32 lines. All lines must be the same.
Figure 4 - 16 P32E1DS1 Module Provisioning TDM2ETH (Sheet 1 of 2)
Synchronizations Connections
3
Double
left click
2
1
3
5 5 5 5 5
7 7 7
Alarms Settings Remote Inventory
Include alarms from sub-nodes
Severity Event Time
Displays Profile Name
selected on Alarm
Severity Profile screen.
Distance to
cross connect.
Select line code to match DS1 input.
Note
2
4
6
8
Entity Probable Cause
350
8
7
Flow ID number
required to transport
CAUTION
DS1 data. Enter any
number from valid
Possibility of
ranges. Refer to
Table 4-1.
Interruption
Flow ID number is line (port) unique and must not be
repeated in radio network. Loss of DS1 data can occur.
COM
SUP
OS
NTP
9
AC
See details
Sheet 2.
4
6
5
Service
9500-4012A
01/29/09
4-37