TURN-OFF PROCEDURE
2.5
The radio is designed for continuous operation. If power must be removed while perform-
ing maintenance on a particular cabinet or shelf, power can be removed by turning off
associated site/rack circuit breakers.
Normally, the turn-off procedures are not used. System design allows
maintenance of the rack without interrupting service. It is recom-
mended that turn-off be performed only in an emergency.
EMERGENCY OPERATION
2.6
If an emergency occurs, such as a short circuit or a fire, turn off the 9500 MPR as quickly
as possible.
2.7
MODULE CONTROLS, INDICATORS, AND CONNECTORS
Do not adjust controls unless instructed to do so in an instal-
lation or maintenance procedure. Unauthorized adjustment
of controls illustrated and described in this section may inter-
rupt traffic and/or degrade system performance.
Module controls, indicators, and connectors used in normal operation or referenced in pro-
cedures are shown in
2-6
Note
CAUTION
Possibility of
Service
Interruption
Figure 2-4
through
Figure
2-7.