Alcatel-Lucent 9500 MPR User Manual page 100

CRI MAJ
MIN
0 3 1
Protection Schemes
Equipment
NE 9500MPR-A 1.0 NE 9500MPR-A 1.0
MSS-8
Slot#1 MSS/CORE-MAIN
Slot#2
Slot#3 MSS/DS3
Slot#4
Slot#5 Slot#5 MSS/DS1
Slot#6
Slot#7 MSS/RADIO Dir#3-Ch#1
Slot#8
Slot#9 MSS/FANS
ODU Dir#3-Ch#1
Select TX (Go and RX (Return)
separation frequency from the
dropdown list.
490.0 MHz
500.0 MHz
530.0 MHz
Undefined
Displays range of TX RF frequencies
that may be entered.
Allows operator to seet transmit power.
The operator can modify only the
4QAM field. Enter the constant power
which will be used with 4QAM
modulation. The same power value will
be used by the 16QAM and 64Qam
modulation schemes.
The power range is shown on the right
side and depends upon the Rerference
Modulation selectd. The minimum and
maximum range is sown in parenthesis
(min XX - max YY).
Read Only Field.
Displays Profile Name selected
on Alarm Severity Profile screen.
Figure 4 - 20 MD300 Module Provisioning, Adaptive Modulation Mode (Sheet 3 of 3)
4-48
WNG IND
0 0
Synchronizations Connections
1
3
5
7
Alarms
Include alarms from sub-nodes
Severity
2
4
6
8
Settings Remote Inventory
Event Time Entity
EXT EQP TRS
0 4 2
7
COM
SUP
OS
NTP
9
AC
Probable Cause
TX RF Frequency is automatically
entered by ODU when ODU is
connected to MSS. If the ODU is not
connected to the MSS, enter the TX
RF frequency, within allowed range.
Read Only Field.
Displays RX RF frequency.
Result of calculation:
RX Freq - TX Freq = Shifter Freq.
Read Only Field.
Indicates local transmitter muting
status. To squelch the transmitter
select Enable and press the Apply
button.
The following indications will appear
in the Tx Mute field:
• Off: Transmitter not squelched.
• Manual: Transmitter squelched
due to manual operation.
• Auto: Transmitter squelched due
to an automatic operation.
Displays Profile Name selected on
Alarm Severity Profile screen.
9500-1361A-rev
01/29/09