Alcatel-Lucent 9500 MPR User Manual page 174

6.3.2.2 Create User Screen
This is an Administrator controlled procedure. Administrator pass-
word is required to create a new user.
Perform the following procedure to create a new user that is then displayed on the Profiles
Management list.
On the Profiles Management screen, click Create. Create User screen is
1
displayed.
Apply the
changes
2
On the Create User screen, enter
3
Enter
User Name
4
Select
Profile
5
Enter User's
tive.
6
Enter user's password again to
7 Click Apply . JUSM performs a syntax check of each field. An error/action mes-
sage is displayed if a syntax error is found. If not, Create User screen closes
and new user's name and profile are displayed on the Profiles Management
screen.
6-10
Note
Cancel the changes
and close the screen
Admin Password
. User Name can be up to 20 characters and is case sensitive.
from list of four profiles to match user's job description.
. Password can be up to 20 characters and is case sensi-
Password
Confirm Password
Enter the Admin
Password
Enter the new user's name
Profile dropdown list
Enter the new user's Password
Enter the new user's Password
again to confirm
9500-6015A-1
11/10/08
.
.