Alcatel-Lucent 9500 MPR User Manual page 83

6
Ethernet Port
#1 Alarms
Check to enable NE
auto-negotiation
functions.
When checked this feature
enables input and output
pause features.
Figure 4 - 12 CSM Ethernet Provisioning (Sheet 2 of 2)
5
Sheet 1
Check to enable the selected
port. Uncheck to disable first in
order to change any settings.
7
B1 B2
A2
A3
A4
Check to allow communication at a data
The default rates
rate of 10 Mb/s but in only one direction
are all checked.
at a time.
Check to allow communication at a
A1
data rate of 10 Mb/s in both directions
at the same time on different wire pairs.
Check to allow communication at a data
rate of 100 Mb/s but in only one direction
at a time.
Check to allow communication at a
data rate of 100 Mb/s in both directions
at the same time on different wire pairs.
Check to allow communication at a data
Topic
rate of 1000 Mb/s in both directions at
Help
the same time on the same wire pairs.
Apply the Port
Status settings.
Apply the auto-
negotiation settings.
9500-1430A-U
08/21/08
4-31