Alcatel-Lucent 9500 MPR User Manual page 35

RJ 45 Connector.
Side view showing the small LED lights.
Link Indicator
On-Link Up
Off-Link Down
Ethernet 1-4
Connectors (RJ45)
Figure 2-4 Control & Switching Module (CSM), Controls, Indicators, and Connectors
Activity Indicator
Blinking-Tx/Rx Activity
Off-No Activity
SFP Indicators
A-Actividy
(Same as RJ45)
SFP
Connector
(For Future Use)
Module Status LED.
Indicates the status of the CSM as follows:
• Off – Module not equipped, not
provisioned, or not powered
• Green Blinking – Download, software
booting, or flash Module realignment in
progress
• Green – In service, normal operation, and
properly provisioned
• Yellow – In standby, properly provisioned
as EPS
• Red – Module fail
• Red Blinking – Module mismatch
Alarm Status.
See Core Main Module alarm status matrix.
-NE MAJOR
M
ALM (red)
-NE minor
m
ALM (red)
L-Link
(RJ45)
Sync In
(Conn-Coax)
Craft
Terminal
USB
(For Future Use)
Warning
W-NE
ALM (yellow)
-NE ABNORMAL
A
ALM (yellow)
S-Module Status
Reset
Pushbutton
Sync Out
(Conn-Coax)
9500-1026ANSI
10/06/08
2-7