Effect Pan And Scan - High End Systems MMS100 User Manual

Effect Pan and Scan

Pan and Scan
Effect Mode parameter DMX value = 255
This effect Zooms into a still image and then, by changing position, you can pan across the image horizontally and
vertically. It only functions on image sizes greater than 1024 x 1024 in at least one direction.
•
Modifier 1:Adjusts the horizontal pan position from 0=left edge to 255 (100%) = right edge of the image. The
default DMX value of 128 (50%) = no adjustment.
•
Modifier 2: Adjusts the vertical pan position from 0 = bottom edge to 255 (100%) = top edge of the image. The
default DMX value of 128 (50%) = no adjustment.
•
Modifier 3:The default DMX value is 0 = no zoom. Increasing the value, increases the zoom into the image to a
maximum at a value of 255 (100%). The total Zoom range is proportional to the image size.
Tip: Although you can apply this effect in several different modes (global, graphic and visual), the modifier channel
adjustments will only function if there is enough "room" left on the image to move. In most cases the first application of this
effect will be the only one to have an effect.