Table of Contents
Advertisement
24
sync to layer 4 movie time and rotation
25
sync to layer 5 movie time and rotation
26
sync to layer 6 movie time and rotation
27
sync to layer 7 movie time and rotation
28
sync to layer 8 movie time and rotation
29
sync to layer 9 movie time and rotation
30
sync to layer 10 movie time and rotation
31 thru 255
reserved.Defaults to mode 0, no selection.
Note 11 - In-Frame / Out-Frame
Note
In-Frame and Out-Frame
11
In-Frame and Out-Frame are converted to a percentage (100 * (value/65535)).
In-Frame sets the point at which movie playback begins.
Out-Frame sets the point at which movie playback ends.
To see the whole movie: In-Frame = 0, Out-Frame = 65535.
If In-Frame > Out-Frame, play begins at the In-Frame, proceeds to the end of the movie, loops to the
beginning of the movie, continues to the Out-Frame, and then jumps to the In-Frame.
Note 14 - Global Control and Feedback
Note 14 Global Control and Feedback
0
no control selected. safe.
1 thru
Reserved.
144
145 thru
Graphic Server Soft-Reset
149
150 thru
Reserved
251
252
On-screen statistics for spherical mapping effect.
253
All-in-one. Display each of the graphics layers and the combined output. The top row shows layers 1
through 4.The second row shows layers 5 through 8.Layer 9 is shown left side row 3.
The composite output is shown as a larger image in the lower right of the view.
Geometry correction or Collage if being used, is shown at the lower left, below layer 9.
254
Performance statistics. Use the Global Control Modifier to set the opacity of background rectangle.
255
On-screen statistics. Use the Global Control Modifier to select text color.
Note 15 - Global Control Modifiers
Note 15
If Performance Stats are selected 0 thru 255 Performance stats background opacity from opaque to transparent.
If On-screen Stats are selected
Global Control Modifier
0 thru 3
Text color selection to aid visibility.
Advertisement
Table of Contents
