All Or Nothing - High End Systems MMS100 User Manual

All or Nothing

All or Nothing
Effect Mode parameter DMX value = 15
This effect reduces all color values to full saturation or no color based on comparison to a set threshold. This effect
creates an image with fully saturated color.
•
Modifier 1: Compares the red component of a pixel to the threshold value and converts it to full color if it is greater
than the threshold and to black if it is below the threshold.
•
Modifier 2: Compares the green component of a pixel to the threshold value and converts it to full color if it is
greater than the threshold and to black if it is below the threshold.
•
Modifier 3: Compares the blue component of a pixel to the threshold value and converts it to full color if it is
greater than the threshold and to black if it is below the threshold.