High End Systems MMS100 User Manual page 58

•
Be sure to return Video Test Pattern to OFF, this field will override incoming DMX
To verify that DMX values are being received by the MMS100
•
Ensure that there is a DMX source connected and sending data.
•
Navigate to the DMX Tab
•
Navigate to the Raw Tab, note the Refresh Rate and the Raw DMX data coming into the fixture. (Note:
Image shows no valid DMX connected)
•
Please see DMX Global
not using a Hog4 MMS100 Fixture Template
and DMX Layer section to see if incoming data is being parsed as intended if