Content Layer Position - High End Systems MMS100 User Manual

Content Layer Position

You can reposition each 3-D object's position in 3-D space by moving it along the X, Y and Z axes. The following
parameters act on an individual object. Use these parameters to position 3-D images in relation to each other.
X Position
The X Position parameter moves your object along the X axis with 16-bit precision.
The midpoint of the 16-bit DMX value range centers the image on the X-axis. Values below the DMX midpoint move the
object left, and values above the DMX midpoint move the object right.
Default DMX Value:
32768 (50%) = object centered in frame
Y Position
The Y Position parameter moves your object along the Y axis with 16-bit precision.
The midpoint of the 16-bit DMX value range, centers the image on the Y-axis. Values below the DMX midpoint move the
object down, and values above the DMX midpoint move the object up.
Default DMX Value:
32768 (50%) = object centered in frame
Z Position
The Z Position parameter moves your object along the Z axis with 16-bit precision.
The midpoint of the 16-bit DMX value range centers the object on the Z axis. Values below the DMX midpoint move the
object away from the viewer and appears to become smaller, and object above the DMX midpoint move the object toward
the viewer and appears to become larger.
Default DMX Value:
32768 (50%) = object centered in frame
Tip: This parameter can create a zoom effect. Remember that by moving an object, you can obscure other objects or
move it behind your viewpoint where it is no longer visible.