Effect Magnifying Lens 2 - High End Systems MMS100 User Manual

Effect Magnifying Lens 2

Magnifying Lens 2
Effect Mode parameter DMX value = 37
This effect applies spherical overlay that magnifies a portion of the texture to create a doubled virtual convex lens over a
portion of the image. You can adjust the size of the lens and move it over different areas of the image.
•
Modifier 1: Controls the horizontal position of the lens' center-point from 0=left edge to 255 (100%) = right edge of
output.
•
Modifier 2: Controls the vertical position of the lens' center-point from 0=top edge to 255 (100%) = bottom edge of
output.
•
Modifier 3: Controls the size of the lens from 0=smallest to 255 (100%) = largest.
Tip: Zooming in with this lens effect creates an additional effect.