Effect Mode Parameters - High End Systems MMS100 User Manual

Effect Mode Parameters

Three Effect Mode parameters are available for each individual 3-D object, each with three Modifier parameters. Both
Effect parameters have an identical list of color and visual effect options. This lets you apply a dual-effect combination to
the selected 3-D object.
NOTE: Not all modes combine effectively. For example, you cannot glow a wobbulating object very well.
The table below describes the interaction between an Effect Mode parameter and its three associated Modifier
parameters. You can find a detailed description and example of each option in the various Graphics Engine - Effect Mode
sections.
NOTE: Modifier channels for Effect Mode 1 are labeled as CMY in the Hog system so you can also make use of
the color picker, HSI, and other Hog functions. Use the CMY parameter controls to adjust the three Effect Mode 1
Modifier parameters for both the Global and Graphic fixture types. The default for Effect Mode 1 is set to CMY1 as
well. Effect Mode 2 and 3 Modifier channels are labeled Mod 1, Mod 2, and Mod 3.
DMX Effect Name
Value
0 Safe (no effects selection)
1 CMY (RGB invert)
2 CMY Add
3 "CMY Add, All Non-black Pixels"
4 "RGB Add, All Pixels"
5 "RGB Add 2, All Pixels"
6 "RGB Add, All Non-black Pixels"
7 RGB Swap to GBR
8 RGB Swap to BRG
9 Solarize 1 inverts a color value < DMX value
10 Solarize 2 inverts a color if value > DMX value
11 Solarize 3 sets color to 0 if value < DMX value
12 Solarize 4 sets color to 0 if value > DMX value
13 DotP and Resample
14 Color Cycle cycles colors with DMX value
controlling cycle speed
15 All or Nothing sets color values > mod value =
255 and all other color values = 0
16 Solid color RGB Red Green Blue
17 RGB Invert
18 "RGB, Invert and Swap to GBR"
19 "RGB, Invert and Swap to BRG"
20 Edge Detect Color
21 Edge Detect B/W
22 "Texture Ripple, Horizontal"
23 "Texture Ripple, Vertical"
24 "Texture Ripple, Circular"
25 "Texture Ripple, Circular Asymmetrical"
26 Transparent Color Fine selects key color using
Modifier channels
27 Transparent Color Medium selects key color
using Modifier channels
28 Transparent Color Coarse selects key color
using Modifier channels
29 "Transparent Color Invert, Fine selects key color
using Modifier channels"
30 "Transparent Color Invert, Medium selects key
using Modifier channels"
31 "Transparent Color Invert, Coarse selects key
using Modifier channels"
32 Scan Line converts image colors to colors in a
single line of the image
33 Transparent Wipes "opens" the selected
graphic to reveal another graphic behind
Modifer 1 Modifer 2
NA NA
Cyan Magenta
Cyan Magenta
Cyan Magenta
Red Green
Red Green
Red Green
Red to Green Green to Blue
Red to Blue Green to Red
Red Green
Red Green
Red Green
Red Green
Red Green
Red Green
Red Green
Red Green
From Red to Cyan From Green to
Magenta
Red to Green Green to Blue
Red to Blue Green to Red
Horizontal Search Vertical Search
Size Size
Horizontal Search Vertical Search
Size Size
Amplitude Frequency
Amplitude Frequency
Amplitude Frequency
Amplitude Frequency
Red Green
Red Green
Red Green
Red Green
Red Green
Red Green
Selects Scan Line Fades to
converted Image
Area of wipe Selects center of
wipe
Modifer 3
NA
Yellow
Yellow
Yellow
Blue
Blue
Blue
Blue to Red
Blue to Green
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Blue
From Blue to
Yellow
Blue to Red
Blue to Green
Comparison
Threshold
Comparison
Threshold
Phase
Phase
Phase + Direction
Phase
Blue
Blue
Blue
Blue
Blue
Blue
NA
Selects from 6
wipe options