Table of Contents
Advertisement
Collage Edge Blending
Variable Edge Blending parameters are used in conjunction with the Collage Generator parameters and allow for on-the-
fly adjustment of blend overlap between projectors. These parameters allow more flexibility for sizing a collage to a given
screen or projection surface, as well as smoother blending if wider blend regions are used. Horizontal and vertical blend
regions can be controlled independently of one another.
The Variable Edge Blend Horizontal parameters allow 16-bit control of the horizontal blend region width from 0% (hard
edge) up to 50% of the image size. The default fixture library value has been chosen to give a 9% overlap, this starting
value is adjustable based on your specific installation.
The Variable Edge Blend Vertical parameters allow 16-bit control of the vertical blend region width from 0% (hard edge)
up to 50% of the image size. The default fixture library value has been chosen to give a 9% overlap, this starting value is
adjustable based on your specific installation.
Advertisement
Table of Contents
