DMX Control Setup and Test
Patching the MMS100 Fixture to a Hog4 Console requires three distinct fixture types. Add one MMS100 Motion Fixture,
one MMS100 Global Fixture, and at least one MMS100 Graphic fixtures for each complete MMS100 unit in the Fixture
Scheduler.
To output an image from a MMS100 fixture:
•
Be sure the attached display device is operating, and if a shutter is present, be sure it is open.
•
Set the Global Intensity parameter to full.
•
Set the Layer Opacity parameter to full.
•
Set the Media Folder and File parameters to 1, which will choose the first image file in the content library.
NOTE: If you have trouble viewing output and you are not using a lighting console from High End Systems, check that the
library for your desk has the correct default settings for all DMX channels. Please see the
library is sending correct defaults to the fixture.
DMX protocol
to ensure the