Installing the Brackets
[1]
Install the 2 BRACKETS to the PROCESSOR. See Figure 7.
• 2 SCREWS, 2 LOCK WASHERS, and 2 WASHERS are provided to install each BRACKET to
the PROCESSOR.
• Hardware to install the BRACKETS to the PLYWOOD is provided by the customer.
• Do not install the BRACKETS to the PLYWOOD now.
MOLDING
LOCK-LIGHT
GASKET
10
IMPORTANT
BRACKET (2)
PLYWOOD
Figure 7 Installing the Brackets
wall
Top View
PLYWOOD
MOLDING
LOCK-LIGHT
GASKET
PROCESSOR
wall
BRACKET (2)
SCREW (2)
H104_0113DCB
H104_0113DA
2B6843