Disinfecting Parts By Wiping - Weinmann MEDUVENT Standard Instructions For Use Manual

8 Hygienic reprocessing
Result

8.5 Disinfecting parts by wiping

Permitted parts
Requirement
96 EN MEDUVENT Standard
11. Check the reusable measuring circuit for residues and residual
soiling.
12. If visible soiling is still present: Repeat manual cleaning.
The reusable measuring circuit has been cleaned manually.
Part
Device
Testing bag
12 V cable
Charging adapter
Filter compartment
The parts have been manually cleaned and are visibly clean
(see "8.4 Cleaning parts manually", page
1. For parts approved for disinfection by wiping, refer to the
cleaning and disinfection plan
disinfection plan", page
2. For the cleaning products, dose and exposure time for the
individual parts, refer to the cleaning and disinfection plan
(see "8.11 Cleaning and disinfection plan", page
3. Prepare the solution for disinfection as specified by the
disinfectant manufacturer.
Disinfection by wiping
Wipe down with Incidin™ Oxywipe S (Ecolab)
When replacing the filter:
Wipe down with Incidin™ Oxywipe S (Ecolab)
92).
(see "8.11 Cleaning and
105).
105).