Table of Contents
Advertisement
11. Stand-alone Option for SRC520
This section describes a Stand-alone Option that allows you to use the SRC520's Control
Unit only.
11.1 Stand-alone Option
A Stand-alone Option allows forming the Control Unit own system including the
Emergency Stop input and Safety Door input by connecting an Extension Emergency
Connector Unit to the Control Unit.
NOTE
The Stand-alone Option has been available from SPEL95 Ver2.5.
If necessary, refer to the "Function 2.3 Control Unit" for functions of the Control Unit.
11.2 System Configuration
11.3 Installation
When installing the Control Unit, it must be placed in the proper environment.
For details, refer to the "Function 3. Installation".
SRC520
Control Unit
Function 11. Stand-alone Option for SRC520
OP500
Camera
Solenoid Valve
Driver
Sensor
Motor
87
Advertisement
Table of Contents
