Power Plug - Epson SRC520 Manual

Function 3.3 Power Supply (Installation)
The AC power cable of the Drive Unit is equipped with a power plug. Make sure that
the plug is compatible with the power outlet in your area. If not, replace the attached
plug with the one that is suitable in your area.
WARNING
Plug Specification:
X terminal
Y terminal
Z terminal
W terminal
The Drive Unit's AC power cable is specified as follows:
Conductor
Insulator
Braided
Shield
Sheath
Cable
28

3.3.2 Power Plug

If it is necessary to change the plug to fit the outlet in your factory, be certain to
connect the protective earth wire of the AC power cable, colored yellow/green,
to the earth terminal of the factory power supply. The equipment must be
protective earth wire properly at all times to avoid the risk of electric shock.
Always use the power plug.
factory power supply
Terminal
AC power
Open
AC power
Protective earth wire
Item
Structure
Diameter
Color
Diameter
UL. Style No. 1015
Braid Density : 70 %
Color
Diameter
Length
Never connect the controller directly to the
Description
Brown
－
Blue
Green/Yellow
Specification
: 41 lines/0.26 mm (AWG#14)
: 1.9 mm (TYP)
: Brown, Blue (for AC Power Source)
Green/Yellow (for Protective Earth)
: 3.5 mm (TYP)
: Black
: 10.5 mm (TYP)
: 3.5 m
Color