Epson SRC520 Manual page 123

(6) Remove an affixing screw from MIB and remove the MIB out of the slot in the
Control Unit.
(7) Disconnect the cable from MIB by releasing the connector lock as shown below.
(8) Disconnect any cables that are connected to the Drive Bay Unit (DC-ROM drive,
FDD and HDD mounting case).
Do not shock, shake or drop the HDD, FDD and CD-ROM drive.
CAUTION
When these disk drives are shocked physically, it may damage the contained data.
(9) Unscrew all the mounting screws on the Drive Bay Unit to remove the unit.
HDD mounting case
CD-ROM drive
Maintenance
Drive Bay Unit
FDD
3.5 Replacing the System Panel (Control Unit)
111