Table of Contents
Advertisement
[Troubleshooting]
_____________________________________________________________________________
Solution 01
Under Windows, try changing the COM port number by going under Control Panel > Hardware
and Sound > Device Manager.
Open the Ports (COM & LPT) drop down menu, right click on the COM port and select Proprieties.
Select the Port Settings tab and then click on Advanced. Once in Advanced menu select from the
drop-down menu a COM number between COM1 and COM9 and click on OK.
Solution 02
Check if the one or more led is on, if it is. Try changing USB post on your computer. If it is not,
change the USB cable or reboot your pc.
98
28 aprile 2021
Advertisement
Table of Contents
Need help?
Do you have a question about the qbmove Advanced Kit and is the answer not in the manual?