Table of Contents
Advertisement
Maintenance
REAR BRAKE LEVER
The control lever is set to the correct ergonomic
position during assembly of the vehicle.
To change the position of the lever:
•
Rest the vehicle on its stand.
•
Partially undo the screw (4).
•
Turn the cam (5) finding the best posi-
tion for the pedal (3).
•
Tighten the screw (4) and check the
cam is stable in position.
CAUTION
TO ADJUST THE PLAY OF THE GEAR LEVER, PLEASE
CONTACT AN Official Aprilia Dealer. IF YOU ARE ADE-
QUATELY TRAINED AND EXPERIENCED, REFER TO THE
INSTRUCTIONS IN THE WORKSHOP BOOKLET AVAILA-
BLE ALSO AT ANY Official Aprilia Dealer.
Clutch system
Regolazione leva frizione
Adjust the clutch when the engine stops or the ve-
hicle tends to move forward even when clutch
lever is operated and the gear engaged, or if the
clutch "slides", resulting in acceleration delay con-
sidering the engine revs.
Minor adjustments can be realized by acting on the
clutch lever adjuster operating as follows:
•
Turn the set screw (3) toward the di-
rection of motion to increase the lever
play (1) and check operation of the
guide using the knob (2) as in riding
position.
•
Ensure that the play is between 1 and
3 mm (0.039 and 0.12 in).
MAIN - 84
RS 660 - Tuono 660
Hide quick links:
Advertisement
Table of Contents
