RS 660 - Tuono 660
•
Unhook the cable from the support
plate.
•
Disconnect the saddle opening cable
(16) from the bracket connected to the
ignition switch assembly.
•
Unscrew the four screws (17) fastening
the passenger pedals supports to re-
move them.
•
Remove the four screws (18).
(if applicable)
•
If the vehicle is equipped with the APRILIA MIA control unit (located on the right side), it is
necessary to disconnect the connector and the control unit itself before proceeding with the
removal of the wheel arch.
Bodywork
BODYW - 409