Braking system
•
Insert and tighten the two brake calliper
fixing screws (2) to the prescribed tor-
que.
•
After having adequately protected the
calliper, connect the brake hose, the
special screw (3) and tighten it to the
prescribed torque.
•
Fill with oil and bleed the system.
Rear brake disc
Removal
To remove the rear brake disc, after removing the
wheel, proceed as described:
•
Remove the five fixing screws (1) of the
tone wheel and of the brake disc on the
rim.
BRAK SYS - 348
RS 660 - Tuono 660