RS 660 - Tuono 660
•
Keeping the screw (1) still, unscrew the
locking nut (2) of the rear brake reser-
voir (3) disconnecting it from the frame.
•
Remove the two rear brake pump fas-
tener screws (4).
•
Remove the two rubber clamps (5).
•
Unclip the rear brake switch (6) and
rear ABS sensor (7) wiring harness
from the cable grommet.
•
Remove the brake master cylinder (8)
from the pumping element (9).
Braking system
BRAK SYS - 337