Swinging Arm - APRILIA Tuono 660 2021 Service Station Manual

RS 660 - Tuono 660

Swinging arm

Pos. Description
1 Swingarm pivot bolt self-locking nut
2 Chain feeder shoe SHC flanged fas-
tening screws
Removing
Place the motorcycle on the central stand and se-
cure it using a lifting jack, in order to be able to
keep the rear part raised when removing the
swingarm.
To proceed with the removal of the swingarm, it is
necessary to first remove the rear wheel, rear
mudguard and crankcase cover.
•
Then remove the screw (1), with its
spring washer, which fixes the left rider
footrest support to the engine.
S
WINGARM
Type Quantity
M16 1 110 Nm (4.33 lbf ft)
M5x16 2
Torque Notes
2 Nm (1.47 lb ft)
CHAS - 297
Chassis
-
-