Removing The Starter Motor - APRILIA Tuono 660 2021 Service Station Manual

Engine
Pos. Description
1 Starter motor fastening screws
2 Starter ring gear containment plate
fastening screw
3 Rotor fastening screw
4 Stator SHC fixing screws
5 Free wheel on rotor SHC fixing
screws
6 Stator wiring harness support plate
fixing screws

Removing the starter motor

To remove the starter motor it is necessary to first
remove the control unit complete with support,
proceeding as described:
•
Disconnect the connectors (1) from the
control unit.
•
Remove the control unit (2) from the
support.
ENG - 146
F - I
LYWHEEL GNITION
Type Quantity
M6x35 2
M6x35 1
M14x30 1
M6x30 3
M6x18 3
M5x14 2
RS 660 - Tuono 660
Torque
12 Nm (8.85 lbf ft)
12 Nm (8.85 lbf ft)
195 Nm (143,82 lbf ft)
10 Nm (7.38 lbf ft) Pre-impregnated
14 Nm (10.33 lbf ft) Pre-impregnated
3 Nm (2.21 lbf ft) Pre-impregnated
Notes
-
-
-