Removing The Rider Footrest- Rear Brake Control Lever Right Support Unit - APRILIA SL Mille Workshop Manual

SL mille
7.1.44 REMOVING THE RIDER FOOTREST - REAR
BRAKE CONTROL LEVER RIGHT SUPPORT
UNIT
Carefully read 0.4.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
• Position the vehicle on the stand.
Wait until the engine and the exhaust silencer have
completely cooled down.
Driving torque of the rider footrest right guard
screws: 6 Nm (0.6 kgm).
• Unscrew and remove the two screws (1).
• Remove the protection element (2).
• Withdraw and remove the spring (3).
• Release the ball joint (4) from its seat.
Brake pump screws driving torque: 12 Nm
(1.2 kgm).
• Unscrew and remove the two screws (5), taking the
nuts.
• Move the rear brake pump (6).
• Unscrew and remove the stoplight switch (7).
Rider's footrest left support screws driving torque:
25 Nm (2.5 kgm).
• Unscrew and remove the two screws (8).
• Remove the whole unit (9).
To disassemble the unit (9), proceed as follows:
Observe the position of the components, in order to
be able to reassemble them correctly.
Rider right footrest screw driving torque: 25 Nm (2.5
kgm).
• Unscrew and remove the screw (10), taking the wash-
er.
Upon reassembly, correctly position the washer (14)
and the spring (15), coupling the rider footrest (12)
with the rider footrest support (11) correctly.
CHASSIS
Release 00/2001-05 - - - - - - - - - -
0-
31 -
00