RS 660 - Tuono 660
•
Remove the pads (6).
AFTER REMOVING THE PADS, DO NOT OPERATE THE
BRAKE LEVER OR THE CALLIPER PLUNGERS COULD
GO OUT OF THEIR SEATS RESULTING IN BRAKE FLUID
LEAKAGE.
Installing
To fit the rear brake pads proceed as described:
•
With the brake calliper in hand and
then removed from its position, insert
the brake pads (1) into the calliper.
•
Position the spring (2).
•
Insert the pin (3).
Braking system
BRAK SYS - 357