RS 660 - Tuono 660
Removing the countershaft
To proceed with the removal of the counter-shaft
it is necessary to remove the upper crankcase,
then remove it from its seat.
Refitting the crankcase halves
To proceed with the coupling of the crankcases
after having inserted all gearbox components, the
crankshaft complete with connecting rods/pistons,
proceed as described:
•
Generously lubricate the counter-shaft
bushings.
•
Insert the counter-shaft (1) on the
crankcase checking the correct posi-
tion determined by the references visi-
ble on the gears.
•
Generously lubricate the crankshaft
and counter-shaft at the rotation points
of the bushings.
Engine
ENG - 225