RS 660 - Tuono 660
TABLE F1 - REAR ABS SENSOR
•
The wiring (1) of the rear ABS sensor
must pass under the rear mudguard
and locked to the ABS brake pipe with
3 cable grommets (5).
TABLE F2 - REAR ABS SENSOR
•
The wiring (1) of the rear ABS sensor
must pass through the cable grommet
(6) connected to the ABS modulator
support and then inside the saddle
support.
TABLE F3 - REAR ABS SENSOR
•
Operating on the right side of the mo-
torcycle, after connecting the connec-
tor (7) of the rear ABS sensor, hook it
to the clip (8).
Electrical system
ELE SYS - 111