RS 660 - Tuono 660
•
Working from the right side of the ve-
hicle, insert the swingarm pin (6) and
the spacer (7) making sure of the cor-
rect orientation.
•
The machined part must be facing the
swingarm.
•
Insert the "T" bush (8) in the swingarm.
•
Check the correct positioning of the
two bushings (9) on the shock absorb-
er and after having positioned it in its
seat, keeping the screw (10) blocked,
tighten the nut (11) to the prescribed
torque.
•
Position the complete brake calliper on
the guide on the swingarm.
Chassis
CHAS - 303