APRILIA Tuono 660 2021 Service Station Manual page 351

RS 660 - Tuono 660
Removal
To remove the front brake disc, after removing the
wheel, proceed as described:
THE FOLLOWING OPERATIONS REFER TO
ONE DISC BUT APPLY TO BOTH
•
Remove the six fixing screws (1) of the
tone wheel (if applicable) and of the
brake disc on the rim.
•
Remove the tone wheel (2) (if applica-
ble).
•
Remove the brake disc (3).
Disc Inspection
•
The following operations must be car-
ried out with the brake discs fitted on
the wheel; they refer to a single disc,
but are valid for both.
•
Check the disc for wear by measuring
the minimum thickness with a micro-
meter in different points. If the mini-
mum thickness, even in a single point
Braking system
BRAK SYS - 351