APRILIA Tuono 660 2021 Service Station Manual page 323

RS 660 - Tuono 660
•
Remove the screw (13) and collect the
spring washer (14) and the spacer
bushing (15).
•
Using a pin with adequate dimensions
(length greater than 350 mm and di-
ameter less than/equal to 30 mm),
push the swingarm pin from left to right
out of its seat so that the pin used re-
places the swingarm pin.
•
Remove the fixing screw (16) of the
rear stop switch (17) and after releas-
ing the wiring from the cable grommet,
separate the protective cover (18) from
the switch (17).
•
Release the brake lever return spring
(19) and remove it.
Chassis
CHAS - 323