Table of Contents
Advertisement
Intel® Server System M70KLP Family Technical Product Specification
The low-profile air duct used in the GPU enabled system option will accommodate 1U processor heat sinks
and allow support for one (1) GPU add-in card (Full-Height Full-Length Double-wide) + one (1) Full-Height
Half-Length PCIe add-in card from each riser card assembly. Mounted atop the air duct is an M.2 interface
board capable of supporting up to two (2) M.2 SATA SSDs, and a mounting feature to support one (1) Intel®
RAID Maintenance Free Backup (RMFBU) module.
The following illustrations identify the features found on the back panel for both the Standard and GPU
enabled system options. All I/O connectors, buttons, LEDs, OCP support, and power supply bays will be
common between the two system options.
The base Standard system option supports up to six (6) server board mounted PCIe* 3.0 add-in cards. Riser
card options can add support for an additional six (6) PCIe 3.0 add-in cards
PCIe – FH, HL
PCIe – FH, HL
PCIe – FH, HL
OCP 3.0 Add-in
card bay
Riser #0
1
Some riser card add-in slots require that PCIe bus lanes be cabled to the riser cards from one or more of the PCIe
slim-line connectors on the server board.
15
Figure 6. Low Profile Air Duct (GPU Systems Only)
OCP Hot Plug
Button
(Not Supported)
Server Board mounted
add-in card Slots
Figure 7. Standard System - Back Panel Features
1
.
PCIe – HH, HL
PCIe – HH, HL
PCIe – HH, HL
Mgmt.
VGA
Riser #1
Port
USB
3.0
1
0
Advertisement
Table of Contents
