Error Messages; Indicator Errors; Scale Errors - Bilanciai DD1010 FLYNET Use, Maintenance And Installation Manual

7

ERROR MESSAGES

7.1

Indicator errors

Problem
The indicator does not turn
on by pressing the power
key
The indicator does not
turn on
Pressure on the touch
screen has no effect
7.2

Scale Errors

Problem
OVERLOAD
UNDERLOAD
- -
- - - - - -
- LOCK -
DD1010 FLYNET
Cause
The blue LED is off
Wrong key press
Uncalibrated display
Cause
The scale is overloaded
The scale is negative by at
least 20 divisions.
This message is
displayed if the scale is
approved, otherwise, the
weight preceded by the '-'
character is displayed.
Non-resettable weight
Unstable weight
Instrument not reset
correctly
Check the status of the green LED on the power
supply unit:
if it is on, check the correct insertion of the
connector in point 9
Press on the logo in the centre of the key.
When pressed, you can feel the key cover being
pressed
Switch the indicator off and on again.
Within 5 seconds of switching on press
anywhere on the display.
Perform the display calibration operations.
Reduce the weight to a value lower than the
maximum capacity so that it is suitable to the
weighing area
Press the reset key:
If the value does not reset to zero after pressing
only
the key:
1) switch off the instrument and repeat the
switching on operations;
2) inform the Service if the problem persists.
Unload the scale
Remove the cause of weight instability and try to
switch the indicator on again
Unload the scale
93
Remedy
Remedy