Bilanciai DD1010 FLYNET Use, Maintenance And Installation Manual page 43

CMA
Gibertini
Mettler/MT8530/MTBBA462/WW-
P/C100
DD1010 FLYNET
COM Repeater scale connection port
Number of the Set the number of the indicator from
indicator to be which the weight is requested
queried
Number of Set the number of the indicator on which
repeater you are working, i.e. the weight repeater
indicator
Number of Indicates the number of indicators from
indicators which you want to use the weight to
make a sum. (special application)
Indicate 1 as default.
Reading time Reading time, expressed in hundredths
(1/100s) of a second, of the main scale.
Enable reset Allows resetting the weight of the scale to
zero even from the repeater.
Enable self- Allows acquiring a self-weighted tare
weighted tare from the repeater indicator
Enable preset Allows using a preset tare from the
tare repeater indicator
Automatic This function cannot be used
printing
COM Repeater scale connection port
Capacity Indicate the maximum capacity of the
Scale
Division Indicate the division used for the Scale
Unit of Indicate the unit of measurement used by
measurement the Scale among kg, g , lb , oz, t, tn
Tare activation Select how the Tare is acquired from the
Scale among Enabled, Self-weighing
only, Preset only, Disabled
Tare value Indicate whether the tare must be
maintenance maintained also for subsequent weighing
operations
COM
Capacity Indicate the maximum capacity of the
Scale
Division Indicate the division used for the Scale
Unit of Indicate the unit of measurement used by
measurement the Scale among kg, g , lb , oz, t, tn
Tare activation Select how the Tare is acquired from the
Scale among Enabled, Self-weighing
only, Preset only, Disabled
41
Repeater scale connection port