Opening The Indicator; Plastic Version - Bilanciai DD1010 FLYNET Use, Maintenance And Installation Manual

10.2

Opening the indicator

10.2.1 Plastic version

2
Figure 10.2-1 - Opening the indicator
Referring to the previous figure, proceed as follows:

Remove the four screws (ref. 1) and rotate the cover forward, holding it up with one hand to
avoid damaging the connections.

Disconnect the connector from the display (ref. 2).

Place the complete display cover on a work table.
DANGER
When performing installation or maintenance on components inside the indicator, always make
sure that it is disconnected from the electrical mains.
DD1010 FLYNET
101
1