Information About This Document; Organization Of Notices; Guidelines - ABB B&R FT50 User Manual

Introduction

1.2 Information about this document

This document is not intended for end customers! The safety guidelines required for end customers
must be incorporated into the operating instructions for end customers in the respective national lan-
guage by the machine manufacturer or system provider.

1.2.1 Organization of notices

Safety notices
Contain only information that warns of dangerous functions or situations.
Signal word
Danger!
Warning!
Caution!
Notice!
General notices
Contain useful information for users and instructions for avoiding malfunctions.
Signal word
Information:

1.2.2 Guidelines

European dimension standards apply to all dimension diagrams.
All dimensions in mm.
Unless otherwise specified, the following general tolerances apply:
Nominal dimension range
Up to 6 mm
Over 6 to 30 mm
Over 30 to 120 mm
Over 120 to 400 mm
Over 400 to 1000 mm
6
Description
Failure to observe these safety guidelines and notices will result in death, severe injury or substantial damage to property.
Failure to observe these safety guidelines and notices can result in death, severe injury or substantial damage to property.
Failure to observe these safety guidelines and notices can result in minor injury or damage to property.
Failure to observe these safety guidelines and notices can result in damage to property.
Description
Useful information, application tips and instructions for avoiding malfunctions.
General tolerance per
DIN ISO 2768 medium
±0.1 mm
±0.2 mm
±0.3 mm
±0.5 mm
±0.8 mm
Power Panel FT50 User's manual V1.19