Table of Contents
Advertisement
Configuration
7.1.1.10.1 Configuring the update server
The following figure shows the default settings for the configuration of the update server on service page Update:
VNC
Web
Storage
Update
Backup & Reset
Security
Update server type
Default setting: TFTP
The following settings are possible:
TFTP (Trivial File Transfer Protocol) is a very simple data transfer protocol.
TFTP
FTP (File Transfer Protocol) offers more possibilities than TFTP.
FTP
Get update server from DHCP server
Default setting: Enabled
All information required by the update server for the configured type is requested from the DHCP server. This
corresponds to the information that must be entered manually when the option is disabled (see the following two
sections "Configuration of an update server of the type
If this option is disabled, one or more additional input fields are displayed depending on the selected update server
type. They are described in the following two sections:
7.1.1.10.1.1 Configuring an update server of type TFTP
If option Get update server from DHCP server is disabled and update server type TFTP is selected, input field
Hostname / IP address is displayed:
VNC
Web
Storage
Update
Backup & Reset
Security
OPC UA
Hostname / IP address
Default setting: EMPTY (no update server entered)
To update a Power Panel from a TFTP server, a hostname or IP address for the TFTP server must be specified.
By default, port 69 is used for the connection to the TFTP server.
If the TFTP server makes its services available on a different port, the port must be specified explicitly together
with the IP address or hostname:
Syntax
Example
IP address:Port
10.23.20.38:1069
Hostname:Port
tftp server:1169
Information:
If the entered IP address is incomplete or no TFTP server exists for the IP address or entered hostname,
a message will be output that no network connection could be established if a connection attempt fails
during the update process.
74
Load boot logo / animation
Press to load boot logo / animation from a USB flash drive
Update server type
Specify the update server type
Get update server from DHCP server
TFTP
and FTP").
Load boot logo / animation
Press to load boot logo / animation from a USB flash drive
Update server type
Specify the update server type
Get update server from DHCP server
Hostname / IP address
Description
A connection to IP address 10.23.20.38 is established on port 1069.
A connection to the host tftp-server is established on port 1169.
TFTP
✓
TFTP
Power Panel FT50 User's manual V1.19
Advertisement
Table of Contents
