Table of Contents
Advertisement
Installation
5.4.3.2 Flange adapter (6ACCMA10.0001-000)
Information:
This accessory is compatible with the following FT50 sizes:
• 15.6" panel
• 21.5" panel
Dimensions
Instructions
1. Attach the round panel gasket to the panel (see
2. Mount the adapter bracket.
3. Attach the second, narrower sealing ring to the adapter bracket (see
4. Tighten the M22 nut (Torque: 10 Nm).
5. Secure the flange using the two screws (Torque: 1.3 Nm).
6. Connect the cable to the panel and secure it before the panel (including the preinstalled flange adapter) is
screwed in place.
42
34
40
"General information" on page
50
34).
"General information" on page
Power Panel FT50 User's manual V1.19
34).
Advertisement
Table of Contents
